Originally Posted by sdm1130 (Post 11997214)

I have been there, and I think a non-aviation fan would probably find it somewhat interesting. The airpark has a 747-100, 737-100, 727, Concorde and one of the old 707 AF1s that you can walk around (you can walk through the AF1 and Concorde). The museum itself tells the history of flight and has many planes and exhibits to look at. I'm not much for these types of museums, so I only spent about an hour in there but if you read and look at everything, you could probably spend half a day in there.

Originally Posted by rolov (Post 11997144)

It takes longer to get into the city though, I think the distance is a bit more also.

Originally Posted by sdm1130 (Post 11997363)

Welcome to the land of :rolleyes:!

Originally Posted by Anglo Large Clawed Otter (Post 11997372)

Welcome to the productivity pit.

Originally Posted by CO 1E (Post 11997455)

It half an hour because the airport is 45 miles from the city.

Also, the Renaissance KL sucks. I can't wait to check into the Westin tomorrow morning.

Originally Posted by FreqFlyerPhil (Post 11997292)

Well, I can't very well turn down a personal invitation!

Originally Posted by belynch (Post 11997478)

So, do I get a referral bonus?

Originally Posted by FreqFlyerPhil (Post 11997292)

Well, I can't very well turn down a personal invitation!

Originally Posted by rolov (Post 11997485)

You get a cupcake.

Originally Posted by belynch (Post 11997498)

I was hoping for a taco. :rolleyes:

Originally Posted by belynch (Post 11997498)

I was hoping for a taco. :rolleyes:

Originally Posted by belynch (Post 11997498)

I was hoping for a taco. :rolleyes:

Originally Posted by sdm1130 (Post 11997272)

At the 120k level, I can't use CO on the TPAC segment to connect to KE (or KE to connect to CO on TPAC), correct?

For some reason, I keep forgetting how this ridiculous rule works... :rolleyes:

Originally Posted by CO 1E (Post 11997513)

You can't use CO on the TPAC segments if you are connecting onward on KE.

Originally Posted by CO 1E (Post 11997513)

You can't use CO on the TPAC segments if you are connecting onward on KE.