Rolling out cookie dough
#1
Original Poster
Join Date: Sep 2007
Location: Central Mass
Programs: Independent
Posts: 4,829
Rolling out cookie dough
So I think I am getting pretty close to my grandmother's cookie recipe (actually, I think they may come pout even better than hers the next time!). I am planning on perfecting it over the next couple of months.
But, the one big problem I have is rolling out the dough. I just suck at it and hate it. I can never get it to an even thickness. I've tried the little things that go on the ends of the rolling pins - they did nothing to help. Does anyone have any other ways of cutting out cookies that either doesn't require rolling out the dough, or makes rolling it out easy? I have tried the sliced roll idea, but again I cant cut straight to save my soul, and the cookies come out as squished ovals.
But, the one big problem I have is rolling out the dough. I just suck at it and hate it. I can never get it to an even thickness. I've tried the little things that go on the ends of the rolling pins - they did nothing to help. Does anyone have any other ways of cutting out cookies that either doesn't require rolling out the dough, or makes rolling it out easy? I have tried the sliced roll idea, but again I cant cut straight to save my soul, and the cookies come out as squished ovals.
#3
FlyerTalk Evangelist
Join Date: Jun 2010
Location: TOA
Programs: HH Diamond, Marriott LTPP/Platinum Premier, Hyatt Lame-ist, UA !K
Posts: 20,061
So I think I am getting pretty close to my grandmother's cookie recipe (actually, I think they may come pout even better than hers the next time!). I am planning on perfecting it over the next couple of months.
But, the one big problem I have is rolling out the dough. I just suck at it and hate it. I can never get it to an even thickness. I've tried the little things that go on the ends of the rolling pins - they did nothing to help. Does anyone have any other ways of cutting out cookies that either doesn't require rolling out the dough, or makes rolling it out easy? I have tried the sliced roll idea, but again I cant cut straight to save my soul, and the cookies come out as squished ovals.
But, the one big problem I have is rolling out the dough. I just suck at it and hate it. I can never get it to an even thickness. I've tried the little things that go on the ends of the rolling pins - they did nothing to help. Does anyone have any other ways of cutting out cookies that either doesn't require rolling out the dough, or makes rolling it out easy? I have tried the sliced roll idea, but again I cant cut straight to save my soul, and the cookies come out as squished ovals.
WRT even thickness dough rolling, there are some videos on YouTube that show how to use dowels or other items to support the rolling pin to generate a uniform thickness dough.
David
#4
Original Poster
Join Date: Sep 2007
Location: Central Mass
Programs: Independent
Posts: 4,829
The dough, when refrigerated, is pretty firm. The problem is I am a major klutz and all thumbs. So even when slicing, I just cant get slices that are even. I don't have much kitchen space for all kinds of fancy long equipment. I have tried some of the tips - the dowels just kept going all over the place, and the bands didn't seem to work. I think if I had a hue counter and a super long pin where I could extend beyond the dough it would work better, but I don't. I was looking at rolling machines, but pasta rollers are too narrow, and sheeters cost a fortune and I have no place to store it.
#5
A FlyerTalk Posting Legend
Join Date: Jun 2004
Location: Either at the shooting range or anywhere good beer can be found...
Posts: 51,050
The dough, when refrigerated, is pretty firm. The problem is I am a major klutz and all thumbs. So even when slicing, I just cant get slices that are even. I don't have much kitchen space for all kinds of fancy long equipment. I have tried some of the tips - the dowels just kept going all over the place, and the bands didn't seem to work. I think if I had a hue counter and a super long pin where I could extend beyond the dough it would work better, but I don't. I was looking at rolling machines, but pasta rollers are too narrow, and sheeters cost a fortune and I have no place to store it.
#6
FlyerTalk Evangelist
Join Date: Jun 2001
Location: Redondo Beach, Ca
Posts: 30,748
Would something like this work to cut the refrigerated dough?
OP...are you trying to roll out too big of a piece ? Once you have your dough made, cut into 2 or 3 balls and only roll out one at a time while the others stay refrigerated. A small piece is easier to work woth. If you are using a French pin, switch to the other kind.
If you are using a log of dough to cut into slices, lay it next to a ruler & mark the distances.
or give up and make drop or bar cookies.
#7
A FlyerTalk Posting Legend
Join Date: Jun 2004
Location: Either at the shooting range or anywhere good beer can be found...
Posts: 51,050
I dont think a mandolin or V slicer would work with dough.
OP...are you trying to roll out too big of a piece ? Once you have your dough made, cut into 2 or 3 balls and only roll out one at a time while the others stay refrigerated. A small piece is easier to work woth. If you are using a French pin, switch to the other kind.
If you are using a log of dough to cut into slices, lay it next to a ruler & mark the distances.
or give up and make drop or bar cookies.
OP...are you trying to roll out too big of a piece ? Once you have your dough made, cut into 2 or 3 balls and only roll out one at a time while the others stay refrigerated. A small piece is easier to work woth. If you are using a French pin, switch to the other kind.
If you are using a log of dough to cut into slices, lay it next to a ruler & mark the distances.
or give up and make drop or bar cookies.
#8
FlyerTalk Evangelist
Join Date: Jun 2001
Location: Redondo Beach, Ca
Posts: 30,748
I am not really understanding what the Op wants to make...cookies cut with cookie cutters or just sliced cookies. And who cares if it is oval shaped rather than round (if that is the problem with slicing them). Of course the knife needs to be super sharp and maybe dipped in water between slices if it sticks.
#9
Join Date: Dec 2004
Programs: DL Plat
Posts: 752
For slicing rounds from a cylindrical log of dough, use a piece of dental floss (unflavored!!). Put it under the log and cross over the top and pull on the ends in opposite directions. This applies equal circumferential force and results in round slices! Also you can floss your teeth afterwards for improved dental hygiene =)
For cutout cookies, roll the dough on a piece of parchment, put the dough/parchment on a baking sheet, and chill. Cut out the shapes (still on the parchment/baking sheet) and remove the negative space (the "excess dough") so you don't have to transfer the cutout cookies to a baking sheet. Chilling again prior to baking helps maintain the shape of the cookie but most of the time I'm too lazy to do this.
For cutout cookies, roll the dough on a piece of parchment, put the dough/parchment on a baking sheet, and chill. Cut out the shapes (still on the parchment/baking sheet) and remove the negative space (the "excess dough") so you don't have to transfer the cutout cookies to a baking sheet. Chilling again prior to baking helps maintain the shape of the cookie but most of the time I'm too lazy to do this.
#10
Original Poster
Join Date: Sep 2007
Location: Central Mass
Programs: Independent
Posts: 4,829
If anything the dough is too hard, not too soft.
But the real issue isn't the shape, it's the even th9ickness of the slices. I can't get the dough to roll out even thickness, and when I slice, they always comes out thinner on one side than the other. The result is that part of the cookie over bakes.
I have not tried a mandolin using rolled up dough. I might try that if I can find a cheap enough one to try it out with. I think this dough might be form enough.
But the real issue isn't the shape, it's the even th9ickness of the slices. I can't get the dough to roll out even thickness, and when I slice, they always comes out thinner on one side than the other. The result is that part of the cookie over bakes.
I have not tried a mandolin using rolled up dough. I might try that if I can find a cheap enough one to try it out with. I think this dough might be form enough.
#11
FlyerTalk Evangelist
Join Date: Jun 2001
Location: Redondo Beach, Ca
Posts: 30,748
For slicing rounds from a cylindrical log of dough, use a piece of dental floss (unflavored!!). Put it under the log and cross over the top and pull on the ends in opposite directions. This applies equal circumferential force and results in round slices! Also you can floss your teeth afterwards for improved dental hygiene =)
For cutout cookies, roll the dough on a piece of parchment, put the dough/parchment on a baking sheet, and chill. Cut out the shapes (still on the parchment/baking sheet) and remove the negative space (the "excess dough") so you don't have to transfer the cutout cookies to a baking sheet. Chilling again prior to baking helps maintain the shape of the cookie but most of the time I'm too lazy to do this.
For cutout cookies, roll the dough on a piece of parchment, put the dough/parchment on a baking sheet, and chill. Cut out the shapes (still on the parchment/baking sheet) and remove the negative space (the "excess dough") so you don't have to transfer the cutout cookies to a baking sheet. Chilling again prior to baking helps maintain the shape of the cookie but most of the time I'm too lazy to do this.
#12
FlyerTalk Evangelist
Join Date: Jun 2010
Location: TOA
Programs: HH Diamond, Marriott LTPP/Platinum Premier, Hyatt Lame-ist, UA !K
Posts: 20,061
OP: Your responses are confusing.
It is not clear if your issues are with a) dough logs or b) cutout cookies or c) both.
If it is with b) cutout cookies, here's one way of evenly rolling out your dough:
David
It is not clear if your issues are with a) dough logs or b) cutout cookies or c) both.
If it is with b) cutout cookies, here's one way of evenly rolling out your dough:
David
#13
A FlyerTalk Posting Legend
Join Date: Jun 2004
Location: Either at the shooting range or anywhere good beer can be found...
Posts: 51,050
OP: Your responses are confusing.
It is not clear if your issues are with a) dough logs or b) cutout cookies or c) both.
If it is with b) cutout cookies, here's one way of evenly rolling out your dough:
https://youtu.be/6TVaLrzqe9A
David
It is not clear if your issues are with a) dough logs or b) cutout cookies or c) both.
If it is with b) cutout cookies, here's one way of evenly rolling out your dough:
https://youtu.be/6TVaLrzqe9A
David
#14
Original Poster
Join Date: Sep 2007
Location: Central Mass
Programs: Independent
Posts: 4,829
I have seen the above video. I guess I am just too much of a klutz, because when I try that, the dowels never stay in place, I up with a hump or a depression in the center, and it gets stuck on teh wax paper and I end up with pulled apart cookies.
I think i am going to just go with the sliced dough idea and try the mandolin.