Converting a Thai plug to a UK plug??
Dec 16, 2008 | 7:22 am
#1
Original Poster
Join Date: May 2005
Location: here
Posts: 1,832
Converting a Thai plug to a UK plug??
Apologies in advance for my ignorance on such issues (and also for my likely lack of correct terminology).
I have a Thai lamp with a broken plug sitting in a box in the UK. The plug (before it broke) looked like the top image here: http://www.pattayanewbie.com/Images/...al%20plugs.jpg
I would like to get it working again but have no idea how to attach the two wires into a UK plug (i.e. http://www.richmond.ac.uk/images/res...nt/uk-plug.jpg)
There are three wires in a UK plug and only two in a Thai one.
I realise this is probably basic knowledge for most people, but I have no idea what to do here.
Thanks in advance :-::-::-::-::-::-:
I have a Thai lamp with a broken plug sitting in a box in the UK. The plug (before it broke) looked like the top image here: http://www.pattayanewbie.com/Images/...al%20plugs.jpg
I would like to get it working again but have no idea how to attach the two wires into a UK plug (i.e. http://www.richmond.ac.uk/images/res...nt/uk-plug.jpg)
There are three wires in a UK plug and only two in a Thai one.
I realise this is probably basic knowledge for most people, but I have no idea what to do here.
Thanks in advance :-::-::-::-::-::-:
Dec 16, 2008 | 7:42 am
#2
Join Date: Jun 2007
Programs: Virgin, United, Qantas
Posts: 155
Apologies in advance for my ignorance on such issues (and also for my likely lack of correct terminology).
I have a Thai lamp with a broken plug sitting in a box in the UK. The plug (before it broke) looked like the top image here: http://www.pattayanewbie.com/Images/...al%20plugs.jpg
I would like to get it working again but have no idea how to attach the two wires into a UK plug (i.e. http://www.richmond.ac.uk/images/res...nt/uk-plug.jpg)
There are three wires in a UK plug and only two in a Thai one.
I realise this is probably basic knowledge for most people, but I have no idea what to do here.
Thanks in advance :-::-::-::-::-::-:
I have a Thai lamp with a broken plug sitting in a box in the UK. The plug (before it broke) looked like the top image here: http://www.pattayanewbie.com/Images/...al%20plugs.jpg
I would like to get it working again but have no idea how to attach the two wires into a UK plug (i.e. http://www.richmond.ac.uk/images/res...nt/uk-plug.jpg)
There are three wires in a UK plug and only two in a Thai one.
I realise this is probably basic knowledge for most people, but I have no idea what to do here.
Thanks in advance :-::-::-::-::-::-:
Cut the end of the Thai cable and expose the wires. One should be red/brown and the other black/blue/green. connect the red one to the (P)hase and the black one to the (N)eutral and you will be away.
Note, you better change your bulb since the 240V in the UK will burn it out almost immediately.
Dec 16, 2008 | 8:31 am
#3
Join Date: Sep 2003
Location: Rockville MD USA
Programs: UA former 1K MM
Posts: 2,184
Do 120V bulbs and 240V bulbs have the same size bases? I didn't think you could just put a 240V bulb into a lamp that was originally designed for 120V. I would think you need to replace the bulb socket.
Dec 16, 2008 | 11:16 am
#5
Original Poster
Join Date: May 2005
Location: here
Posts: 1,832
The big pin on the UK plug is the earth - you won't be connecting anything to that since the Thai plug is unearthed.
Cut the end of the Thai cable and expose the wires. One should be red/brown and the other black/blue/green. connect the red one to the (P)hase and the black one to the (N)eutral and you will be away.
Note, you better change your bulb since the 240V in the UK will burn it out almost immediately.
Cut the end of the Thai cable and expose the wires. One should be red/brown and the other black/blue/green. connect the red one to the (P)hase and the black one to the (N)eutral and you will be away.
Note, you better change your bulb since the 240V in the UK will burn it out almost immediately.
So, two things - I guess lamp is a bad description - the thing I have is more like a string of christmas lights.
Both wires are white. Does it matter which one I attach to each side of the UK plug?
thanks again
Dec 16, 2008 | 11:45 am
#6
FlyerTalk Evangelist
Join Date: Nov 2002
Location: ORD
Posts: 14,771
The hot/live/phase wire should be the one that runs through the switch on your lights, if there is one. If there is no switch or dimmer, then it doesn't matter. This picture will help you determine which prong on the plug is which:
http://en.wikipedia.org/wiki/File:Th..._plug_(UK).png
Note it'll work the other way around, but even when the lights are off they will be at 230 V, which can make for dangerous situations.
If you're unsure about this, pay a qualified electrician or lamp shop the 10-15 pounds it should cost to have them do it. Better to be out 15 quid unnecessarily than start a fire or get a nasty shock.
http://en.wikipedia.org/wiki/File:Th..._plug_(UK).png
Note it'll work the other way around, but even when the lights are off they will be at 230 V, which can make for dangerous situations.
If you're unsure about this, pay a qualified electrician or lamp shop the 10-15 pounds it should cost to have them do it. Better to be out 15 quid unnecessarily than start a fire or get a nasty shock.
Dec 16, 2008 | 12:44 pm
#9
FlyerTalk Evangelist
Join Date: Jan 2004
Location: Worldwide
Posts: 12,952