Wrong Seat Map in CX Fleet Configuration Document?
Mar 27, 2019 | 5:30 am
#1
Original Poster
Join Date: Mar 2019
Location: nuoll
Posts: 1
Wrong Seat Map in CX Fleet Configuration Document?
Hello 'sxc', 'cxfan1960', 'QRC3288' and all other regulars on FlyerTalk,
I am writing this thread because I have found a suspected error in the document
Cathay Dragon / Dragonair (KA) Fleet Config and Route Details
Recently, I have been predicting flights for my elder brother and I scrolled down to the 'Seat Map' section.
I was inspecting the seat plans but I am pretty sure that the seat map of
Cathay Pacific 35J (A350-1000 v1)
and
Cathay Pacific 77G (B777-300ER v1)
are the same.
According to the document details, A35J has a config of J46/W32/Y256 and 77G has a config of J40/W32/Y268
However, the picture for the seat map for both the A35J and 77G are identical to each other.
As the picture indicated, A35J showed a config of J46/W32/Y256, and 77G was the same: J46/W32/Y256
I am not here to complain. I just hope that this could be changed as quickly as possible to avoid confusion for the readers of this document.
I am 14 years old and it is my first time using FlyerTalk. Please correct me if I posted in the wrong section or I am wrong.
For some reason, FlyerTalk does not allow me to attach an image of the error.
The errors were still here up to 27 Mar 2019, 7:20 PM.
Best,
Aaron
I am writing this thread because I have found a suspected error in the document
Cathay Dragon / Dragonair (KA) Fleet Config and Route Details
Recently, I have been predicting flights for my elder brother and I scrolled down to the 'Seat Map' section.
I was inspecting the seat plans but I am pretty sure that the seat map of
Cathay Pacific 35J (A350-1000 v1)
and
Cathay Pacific 77G (B777-300ER v1)
are the same.
According to the document details, A35J has a config of J46/W32/Y256 and 77G has a config of J40/W32/Y268
However, the picture for the seat map for both the A35J and 77G are identical to each other.
As the picture indicated, A35J showed a config of J46/W32/Y256, and 77G was the same: J46/W32/Y256
I am not here to complain. I just hope that this could be changed as quickly as possible to avoid confusion for the readers of this document.
I am 14 years old and it is my first time using FlyerTalk. Please correct me if I posted in the wrong section or I am wrong.
For some reason, FlyerTalk does not allow me to attach an image of the error.
The errors were still here up to 27 Mar 2019, 7:20 PM.
Best,
Aaron
Last edited by sxc; Mar 27, 2019 at 11:05 pm Reason: Remove full name
Mar 27, 2019 | 7:12 pm
#2
Join Date: Nov 2007
Location: Hong Kong
Programs: CX, UA, Shangri-La, Hyatt, Starwood
Posts: 8,239
Aaron, you're right. Looks like we had a mistake. Fixing now should be done in 5 minutes. Welcome to FT btw.
Going forward, you can point out any issues you see in this thread: Cathay Pacific Fleet Information
Going forward, you can point out any issues you see in this thread: Cathay Pacific Fleet Information
