ITN problem
Jun 4, 2001 | 1:20 pm
#1
Original Poster
Join Date: Nov 2000
Location: Bangkok
Posts: 673
ITN problem
I tried to use ITN to see how many seats left for flights from NRT to MEM via LAX by NW. If I don't divide it to 2 legs (NRT-LAX and LAX-MEM), it'll show only flights via MSP and SEA. If I force it by putting NRT-LAX and LAX-MEM, it won't accept because the time that the flight from LAX leaves is before the departure time of the flight from NRT due to the time zone change. (LAX is about 16 or 17 hours after NRT but the flight from NRT to LAX is about 10 hours.) ITN should also check the time zone.
Jun 4, 2001 | 4:03 pm
#2
Suspended
Join Date: Feb 2001
Location: Close to the beach
Programs: AA EP, UA 1K, DL GM, Tumlare Bussresor Super Class
Posts: 6,972
There is one to get around the problem:
In the 'Multi city' search, first enter the NRT-LAX leg, and set the departure time at 3 a.m. Then enter the LAX-MEM leg, departure 10 a.m. This will give you the chance to choose NW 2 (NRT-LAX) and NW 544 (LAX-MEM), with both flights leaving on the same date!
[This message has been edited by Vunder31 (edited 06-04-2001).]
In the 'Multi city' search, first enter the NRT-LAX leg, and set the departure time at 3 a.m. Then enter the LAX-MEM leg, departure 10 a.m. This will give you the chance to choose NW 2 (NRT-LAX) and NW 544 (LAX-MEM), with both flights leaving on the same date!
[This message has been edited by Vunder31 (edited 06-04-2001).]
