A universal plug socket... at last?
Jun 1, 2012 | 5:15 am
#1
Original Poster
FlyerTalk Evangelist
Join Date: Feb 2010
Location: LHR
Programs: DL DM 2MM, BA Bronze, Various Hotels
Posts: 10,188
A universal plug socket... at last?
BBC: A universal plug socket... at last?
I am sure many of us find frustration in the variety of electical plugs out there!
I am sure many of us find frustration in the variety of electical plugs out there!
...expressing my delight the other day when I found in my bedrooms in two new hotels in China a simple all-purpose wall socket that took the plugs of many nations - including those of the UK.
I have not previously encountered such a thing in years of travel.
It is wonderful not to have to struggle any longer with those converters that never exactly fit, or fail to have a vital hole or pin. It is normally discovered only when a shave is vital or a flat battery urgently needs a recharge to enable recordings to continue.
Oh, what pleasure to plug in my three-pin British plug the other evening in Inner Mongolia, so very far from home.
I have not previously encountered such a thing in years of travel.
It is wonderful not to have to struggle any longer with those converters that never exactly fit, or fail to have a vital hole or pin. It is normally discovered only when a shave is vital or a flat battery urgently needs a recharge to enable recordings to continue.
Oh, what pleasure to plug in my three-pin British plug the other evening in Inner Mongolia, so very far from home.
Jun 1, 2012 | 6:40 am
#2
Join Date: Apr 2009
Location: GVA, LAX, ICN
Programs: KE MC
Posts: 240
But one still needs to be careful about 110V vs 220V! (50Hz vs 60Hz is usually less of an issue....)
The author should be clear... converters convert voltages; it is the convenience of not needing to carry adapters which makes this receptor useful.
Also, the Italian plug will not fit in the receptor pictured....
Lastly, it would be ideal if the next generation light bulbs (using LEDs) did not use the bulb shape. Heat dissipation is a severe problem for these sockets and is one of the biggest problems with replacing current technology light bulbs with more efficient fluorescents or LEDs.
The author should be clear... converters convert voltages; it is the convenience of not needing to carry adapters which makes this receptor useful.
Also, the Italian plug will not fit in the receptor pictured....
Lastly, it would be ideal if the next generation light bulbs (using LEDs) did not use the bulb shape. Heat dissipation is a severe problem for these sockets and is one of the biggest problems with replacing current technology light bulbs with more efficient fluorescents or LEDs.
Last edited by choijw; Jun 1, 2012 at 6:47 am Reason: add statement regarding next generation light bulbs
Jun 1, 2012 | 7:08 am
#3
FlyerTalk Evangelist
Join Date: Jan 2005
Location: VCE
Posts: 14,165
Italian plug would work just fine in that receptor.
I used an Italian plug recently at a Crowne Plaza in China which was a newbuild and had these type of sockets- no problem what-so-ever (and yes, it was a joy not to need to pull out my mega-adapter pack which is half my carry on).
I used an Italian plug recently at a Crowne Plaza in China which was a newbuild and had these type of sockets- no problem what-so-ever (and yes, it was a joy not to need to pull out my mega-adapter pack which is half my carry on).
Jun 1, 2012 | 7:24 am
#4
Join Date: Apr 2009
Location: GVA, LAX, ICN
Programs: KE MC
Posts: 240
Jun 1, 2012 | 7:30 am
#5
FlyerTalk Evangelist
Join Date: Jan 2005
Location: VCE
Posts: 14,165
Jun 1, 2012 | 9:45 am
#7
Join Date: Feb 2004
Location: Washington, DC USA
Programs: UA; Amtrak
Posts: 2,002
The "universal" adapters I've owned (Kensington, Conair, various no-names) don't have a plug suitable for India or South Africa. Given the growing importance of those countries and the increase in international travel to and from, I always felt like this was a startling oversight. Checking Amazon just now, however, it seems the "150 countries"-compatible adapters are still the standard.
Jun 1, 2012 | 10:56 am
#9
In Memoriam
Join Date: Feb 2000
Location: Easton, CT, USA
Programs: ua prem exec, Former hilton diamond
Posts: 31,801
In many areas they would probably violate local building codes that require the use of a standard socket.
For wide acceptance they would have to overcome that, and get hotels to replace every socket (or it looks like they are big enough that one of them replaces two regular sockets here in the US), which I just don't see current buildings doing. Maybe new construction where you have to put in every socket anyways, but it just won't be worth the expense for them to do it.
For wide acceptance they would have to overcome that, and get hotels to replace every socket (or it looks like they are big enough that one of them replaces two regular sockets here in the US), which I just don't see current buildings doing. Maybe new construction where you have to put in every socket anyways, but it just won't be worth the expense for them to do it.
Jun 1, 2012 | 1:50 pm
#11
FlyerTalk Evangelist
Join Date: Jan 2000
Posts: 15,854
And most hotels in the Us have no need for this, while hotels throughout Europe, Asia and the middle east definately have a need for this. Brazil has had this issue for years as half the country has run on 110 and the other half on 220 and with different types of plugs.
Jun 1, 2012 | 2:07 pm
#12
FlyerTalk Evangelist
Join Date: Nov 2009
Location: Earth. Residency:HKG formerly:YYZ
Programs: CX, DL, Nexus/GE, APEC
Posts: 11,078
In many areas they would probably violate local building codes that require the use of a standard socket.
For wide acceptance they would have to overcome that, and get hotels to replace every socket (or it looks like they are big enough that one of them replaces two regular sockets here in the US), which I just don't see current buildings doing. Maybe new construction where you have to put in every socket anyways, but it just won't be worth the expense for them to do it.
For wide acceptance they would have to overcome that, and get hotels to replace every socket (or it looks like they are big enough that one of them replaces two regular sockets here in the US), which I just don't see current buildings doing. Maybe new construction where you have to put in every socket anyways, but it just won't be worth the expense for them to do it.
I suggested this as part of the 5 years retrofit project for properties in the portfolio that we manage back in 2005 and we did not get approval in 10 major North American cities.
The manufacturer need to obtain UL certification and that is a costly process as well as provision of many testing units.
Jun 1, 2012 | 6:46 pm
#13
Join Date: Jan 2004
Location: SYD+HND+GFK
Programs: UA 1K, QF Plat One, IHG Diamond Ambassador, Hilton Gold, Marriott Gold, Coles FlyBuys
Posts: 2,826
I've seen plugs like this in Thailand for years.
And I agree about electrical codes, I think you'd hit roadblocks in the EU/UK as well as ANZ.
It's certainly nice to stay in a hotel with the multi-socket but as you can't rely on it so you still need to bring your adapters... I'm not sure that will change in my lifetime!
And I agree about electrical codes, I think you'd hit roadblocks in the EU/UK as well as ANZ.
It's certainly nice to stay in a hotel with the multi-socket but as you can't rely on it so you still need to bring your adapters... I'm not sure that will change in my lifetime!
Jun 1, 2012 | 7:33 pm
#14
FlyerTalk Evangelist
Join Date: May 2002
Location: Pittsburgh
Programs: MR LT Titanium, AA LT PLT, UA SLV, Avis PreferredPlus, HH Gold, Hertz PC, National Executive, etc.
Posts: 31,670
This looks like what was installed in my firm's offices in Mumbai when I visited last month.
The Kensington adapter I bought for my trip had no issues with India or UAE hotel plugs.
The Kensington adapter I bought for my trip had no issues with India or UAE hotel plugs.
Jun 1, 2012 | 9:18 pm
#15
Original Poster
FlyerTalk Evangelist
Join Date: Feb 2010
Location: LHR
Programs: DL DM 2MM, BA Bronze, Various Hotels
Posts: 10,188
But one still needs to be careful about 110V vs 220V! (50Hz vs 60Hz is usually less of an issue....)
The author should be clear... converters convert voltages; it is the convenience of not needing to carry adapters which makes this receptor useful.
Also, the Italian plug will not fit in the receptor pictured....
Lastly, it would be ideal if the next generation light bulbs (using LEDs) did not use the bulb shape. Heat dissipation is a severe problem for these sockets and is one of the biggest problems with replacing current technology light bulbs with more efficient fluorescents or LEDs.
The author should be clear... converters convert voltages; it is the convenience of not needing to carry adapters which makes this receptor useful.
Also, the Italian plug will not fit in the receptor pictured....
Lastly, it would be ideal if the next generation light bulbs (using LEDs) did not use the bulb shape. Heat dissipation is a severe problem for these sockets and is one of the biggest problems with replacing current technology light bulbs with more efficient fluorescents or LEDs.
