AA segment run from STL
Nov 30, 2015 | 10:47 am
#1
Original Poster
Join Date: Nov 2015
Posts: 1
AA segment run from STL
Hello all,
I need to squeeze in 10 segments to secure EXP for the next program year. I'll have availability from 12/17 to 12/20; if I need to blow a couple days on the trip, I can make that happen. Any ideas for a segment run? My home location is STL.
Much thanks in advance!
Bill
I need to squeeze in 10 segments to secure EXP for the next program year. I'll have availability from 12/17 to 12/20; if I need to blow a couple days on the trip, I can make that happen. Any ideas for a segment run? My home location is STL.
Much thanks in advance!
Bill
Nov 30, 2015 | 11:21 am
#2
Join Date: Apr 2012
Location: DTW/MBS
Programs: UA 1K, HHonors Diamond, Hyatt Globalist, Formerly Starbucks Gold
Posts: 3,588
I can find some options around 50-70/segment, I think Ideal is in the <40 range. But if you want to spend the night at your home home, here's what I messed around with:
December 17 (617am-530PM)
STL-ORD-BNA-DCA-STL ($148)
December 18
STL-ORD-MKE-ORD-ICT-ORD-STl ($309)
Total cost would be $457 for 10 segements, or $46/segment (again ideal is <40 I think). I'm not very good at segment runs though.
December 17 (617am-530PM)
STL-ORD-BNA-DCA-STL ($148)
December 18
STL-ORD-MKE-ORD-ICT-ORD-STl ($309)
Total cost would be $457 for 10 segements, or $46/segment (again ideal is <40 I think). I'm not very good at segment runs though.
Last edited by BThumme; Nov 30, 2015 at 11:38 am
Nov 30, 2015 | 11:27 am
#3
Join Date: Nov 2008
Location: ORD
Programs: AA PLT
Posts: 2,793
12/17 and 12/20 you can do STL-ORD-MKE r/t for $148 ($37/segment).
12/17 you can do STL-ORD-TPA-CLT-ORD-STL for $200 ($40/segment). Same routing available 12/20 for $30 more.
Go to Google Flights, find cheap destinations from STL on your dates, and then to go Matrix and force 2 or 3 segments each way.
12/17 you can do STL-ORD-TPA-CLT-ORD-STL for $200 ($40/segment). Same routing available 12/20 for $30 more.
Go to Google Flights, find cheap destinations from STL on your dates, and then to go Matrix and force 2 or 3 segments each way.
Last edited by linglingfool; Nov 30, 2015 at 11:49 am