Refueling stop in canada
#1
Original Poster
Join Date: Feb 2008
Location: TOL
Programs: CO
Posts: 290
Refueling stop in canada
I was wondering something about a trip I am taking this summer the flight is going from MSP - STN with a refueling stop in YQX. I was just wondering will they unload the plane and enter Canada and then reboard the flight?
Thanks in advance for you replies.
Thanks in advance for you replies.
#4
FlyerTalk Evangelist


Join Date: Nov 1999
Programs: FB PLT again afater a decade as plebian
Posts: 22,932
Back when YQX was a stop for TATL flights (at least as recent as the '80s for SU, CU and U.S. military charters), there were sterile transit facilities and duty-free shops. Not sure what remains these days.
#5
Join Date: Aug 2004
Location: YHM
Programs: AC, US
Posts: 224
Assuming this is a private airplane that is transiting Canada, the customs clearance procedure is as follows:
1. The pilot-in-command must personally call CBSA's Canpass center (1-888-CANPASS) to provide advance notice of the arrival in YQX. The PIC will need name/date of birth/citizenship/purpose of trip/length of stay etc. for everybody on the plane, plus the plane's tailnumber, ETA, and FBO at YQX. This info must be given to Canpass a minimum of two hours prior to arrival and a maximum of 48 hours. The ETA of the airplane must be within the hours of operation of the customs office at the airport.
2. Upon landing in YQX, plane should taxi to the designated fbo and call the Canpass center again before anybody opens the door. The officer will either release the airplane over the telephone and give permission to deplane, or instruct the PIC to await the arrival of "local" customs officers, who will check passports and do a primary inspection of everybody on the plane, and possibly a secondary inspection as well. If a customs officer is at the fbo awaiting the arrival of the airplane, the second phone call to Canpass (i.e. after landing) isn't necessary.
It's the same procedure for a tech stop as it is for any private plane entering Canada.
If there will be more than 15 people on the plane, the CANPASS system can't be used, and arrangements must be made with the airport's customs office to have officers meet the airplane.
I should add that all of this is in addition to any exit requirements that US Customs may have (e.g. eAPIS)
1. The pilot-in-command must personally call CBSA's Canpass center (1-888-CANPASS) to provide advance notice of the arrival in YQX. The PIC will need name/date of birth/citizenship/purpose of trip/length of stay etc. for everybody on the plane, plus the plane's tailnumber, ETA, and FBO at YQX. This info must be given to Canpass a minimum of two hours prior to arrival and a maximum of 48 hours. The ETA of the airplane must be within the hours of operation of the customs office at the airport.
2. Upon landing in YQX, plane should taxi to the designated fbo and call the Canpass center again before anybody opens the door. The officer will either release the airplane over the telephone and give permission to deplane, or instruct the PIC to await the arrival of "local" customs officers, who will check passports and do a primary inspection of everybody on the plane, and possibly a secondary inspection as well. If a customs officer is at the fbo awaiting the arrival of the airplane, the second phone call to Canpass (i.e. after landing) isn't necessary.
It's the same procedure for a tech stop as it is for any private plane entering Canada.
If there will be more than 15 people on the plane, the CANPASS system can't be used, and arrangements must be made with the airport's customs office to have officers meet the airplane.
I should add that all of this is in addition to any exit requirements that US Customs may have (e.g. eAPIS)
#7
Original Poster
Join Date: Feb 2008
Location: TOL
Programs: CO
Posts: 290



