Why can't I post?
#1
Original Poster
Join Date: Oct 2008
Posts: 10
Why can't I post?
I keep getting this message. Is it because I'm a new member?
Message
Invalid Thread specified. If you followed a valid link, please notify the administrator
If you received this message immediately after posting a new thread, there's a good chance your message was flagged as spam and will be looked at by our moderator team.
Message
Invalid Thread specified. If you followed a valid link, please notify the administrator
If you received this message immediately after posting a new thread, there's a good chance your message was flagged as spam and will be looked at by our moderator team.
#2
In Memoriam, FlyerTalk Evangelist
Join Date: Jun 2000
Location: Benicia CA
Programs: Alaska MVP Gold 75K, AA 3.8MM, UA 1.1MM, enjoying the retired life
Posts: 31,849
Sometimes the software will require a moderator to sign off on posts by new members. Sounds like you're caught there. You'll just need to wait a few hours for the moderator in the forum you posted to authorize you to post.
Welcome to FlyerTalk
Welcome to FlyerTalk
#4
Join Date: May 2004
Location: Home
Programs: AA, Delta, UA & thanks to FTers for my PC Gold!
Posts: 7,676
When your very 1st (or first couple of posts) has a hyperlink, our spam trap will catch it. Read this existing thread for more discussion:
http://www.flyertalk.com/forum/showthread.php?t=853032
You can PM the mods in Mileage Run Deals Forum and see if they can speed it up.
http://www.flyertalk.com/forum/showthread.php?t=853032
You can PM the mods in Mileage Run Deals Forum and see if they can speed it up.
Last edited by lin821; Oct 22, 2008 at 12:46 am
#6
Community Director Emerita
Join Date: Oct 2000
Location: Anywhere warm
Posts: 33,798
I've now approved this thread:
http://flyertalk.com/forum/showthread.php?p=10555468
It was indeed in the approval queue because it had a link in it. Thanks for drawing it to our attention. Hopefully, folks will weigh in and give you some helpful advice.
SanDiego1K
Senior Moderator
http://flyertalk.com/forum/showthread.php?p=10555468
It was indeed in the approval queue because it had a link in it. Thanks for drawing it to our attention. Hopefully, folks will weigh in and give you some helpful advice.
SanDiego1K
Senior Moderator