Create a folder in the root drive [C:] with the name “Scan” and download the zip file which has the “scan.exe” from the below link:

http://www.mcafeeasap.com/downloads/...32-6.0.1-l.zip


• Then download another zip file which has the latest “Beta Dat” files from the below link:

http://vil.nai.com/vil/virus-4d.aspx [Please select the file with the name “avvwin_netware_betadat.zip”]


Extract:

• Once the zip files downloaded, extract the “vscl-w32-6.0.1-l.zip” in the scan folder.
• Then extract the “avvwin_netware_betadat.zip” in the same folder.
• Move the files from the “vscl-w32-6.0.1-l” to the scan folder.
• Then move the files from “avvwin_netware_betadat” to the same scan folder.

NOTE: Please click on “Replace all” to replace the old dat files to the new one.

Create .bat file:

• Once the files extracted, follow the steps below to create a batch file to run the Command-line scan:
• Open a notepad and copy the command given below:

c:\scan\scan.exe /clean /all /adl /program /winmem /unzip /report c:\scan\scan-rpt.txt /rptall

• Save the notepad in the root drive [C:] with the name and extension as “Scan.bat”

Execute the scan in safe mode with command prompt:

Boot the computer in the safe with command prompt by tapping the F8 key while restarting the computer and selecting safe mode with command prompt in the advanced boot menu.

• Type the commands given below to start the SDAT scan:

Type cd\ and press enter.
Then type C:\Scan.bat and press enter.

• It will start the scan will take approximately 2-3 hours to complete the scan.