FlyerTalk Forums - View Single Post - Using IDE drive in a SATA system
Thread: Using IDE drive in a SATA system
View Single Post
Old Aug 3, 2009 | 8:30 am
  #4  
msb0b
20 Years on Site
 
Join Date: Jan 2005
Programs: Dirt
Posts: 949
It depends if you need to boot OS from the IDE drive. If so, you will need a SATA to IDE bridge. You will need one that has 40 pin female so it can plug into your IDE drive.

If the drive is just for storage, then an USB solution would work just fine.
msb0b is offline  
Reply