These are the three options that the modem has, option 1 is selected right now

1: PPP is on the modem. This is the normal mode for this modem when connected to a single computer. In this mode, the PPP session is initiated from the modem. Gateways and routers should work in this mode but their configuration may have to be changed to do so (e.g., you may need to have the gateway/router IP address changed to 192.168.1.1).

2: PPP is on the computer. This mode is normally used if you need to run a PPPoE client on your PC. This mode can be used with a gateway or router which initiates a PPPoE session. To return to the DSL modem user interface you will need to directly connect your PC to the modem without any gateway or router between the modem and the PC.

3: Bridged Mode (PPPoE is not used). This mode must be used if you are connecting to a non-PPPoE network. Selecting this mode will cause the modem to automatically restart.